Your Cart is Empty
As the bathroom can be a high use zone in the house, it is important to understand how to maintain your products.
Below are our suggestions on how to clean and care for them.
• Wipe down the shower or use a plastic squeegee to remove excess water from the glass after use
• Use a trusted glass cleaner on shower glass. If your glass has been treated with Diamond Fusion, please go to diamondfusion.co.nz for cleaning instructions
• Use Vibrance Surface Cleaner to clean the tray and wall liner
• Waste lid and cup should be removed and cleaned regularly
• Drips seals can be removed for cleaning and can simply be replaced when they no longer look their best
• Wipe any spilled liquids from the vanity as soon as possible. Cabinets are water resistant not waterproof
• Ultra Gloss Cabinet Finishes: only use a damp cloth to clean
• Woodgrain and Standard Melamine Cabinet Finishes: for best results use Vibrance Surface Cleaner or a gentle streak free glass cleaner using a soft cloth
• Acrylic, Composite, Vitreous China and Solid Surface Vanity Tops and Basins: use Vibrance Surface Cleaner.
• Light scratches can be removed from an Acrylic or Composite vanity top by using ‘Brasso’ or 1200 grit ‘wet & dry’ sandpaper, followed by polishing with a fine car cutting compound. For deep scratches, we recommend an experienced Acrylic Repairer is contacted
• Glass and Mirrors: for best results we recommend the use of a trusted glass cleaner
• Clean regularly with warm, soapy water using a non-abrasive cleaner.
• Light scratches can be removed from an Acrylic bath by using ‘Brasso’ or 1200 grit ‘wet & dry’ sandpaper, followed by polishing with a fine car cutting compound. For deep scratches, we recommend an experienced Acrylic Repairer is contacted.
Developed and manufactured in New Zealand specifically for Clearlite bathroomware, the Vibrance range is suitable for use on Acrylic, Vitreous China, Porcelain, Tiled and Solid Surfaces.
Note: Before using on other products it should be tested on an inconspicuous area.
If you would like further information on your Clearlite products or need additional cleaning instructions, please contact our After Sales team.
Back to Blogs